Which cutting technologies does Packly use
Packly selects the most suitable cutting technology based on the type of packaging, the chosen material, the thickness of the substrate and the characteristics of the order (format, quantity, customisations). Among the available technologies is laser cutting, which Packly uses, in particular, to ensure maximum production flexibility, customisable shapes and sizes, and no minimum order: it is the most widely used technology, especially for small or medium quantities and for non-standard dielines. For other cases (very thick materials, large quantities), Packly may use alternative cutting technologies that are better suited to those specific conditions.
Why cutting edges may have a different shade
On packaging with a white background made of paper or paperboard, the cut edges may show a slight pale straw-yellow tint compared to the rest of the surface.
This is an oxidation effect on the material caused by the heat of the laser during cutting: it is a typical and predictable characteristic of laser cutting, particularly noticeable on white or very light backgrounds, while on dark or coloured backgrounds it is less noticeable.
This effect falls within the production tolerance standards recognised across the entire paper packaging industry, not only by Packly: no supplier using laser cutting can eliminate it completely as it is linked to the physical principle of heat-based cutting. It is therefore not a manufacturing error or a defect specific to a single order.
How to reduce the visibility of the effect
The effect cannot be eliminated when using laser cutting on white paperboard, but it can be made less visible with a few choices made during the graphic design phase:
- Avoid completely white backgrounds right up to the cutting edges: a thin strip of colour, a texture or a printed border along the perimeter reduces the visibility of the oxidation.
- Choose a coloured or dark background for the entire packaging, where the effect is not noticeable.
These precautions reduce the visibility of the effect but do not remove it entirely: it remains a characteristic of the process, not a defect that can be corrected in production.
